-
7:00 a.m.
Coffee and pastries.
7:30 a.m.
Begin loading bus.
8:00 a.m.
Depart JMU.
8:50 a.m.
Arrive at site.
9:15 a.m.-12:30 p.m.
Site Visit
9:15 a.m.-9:45 a.m.
Introduction to site. History of 2009 failure and remediation, SW introduces kinematics (Strike-Dip, Failure Types, Friction Angle).
9:45 a.m.-10:15 p.m.
Demonstration of basic Brunton data collection.
10:15 a.m.-10:45 p.m.
Demonstration of digital data collection.
10:45 a.m.-11:30 p.m.
Demonstration of digital photogrammetry.
11:30 a.m.-12:15 p.m.
Demonstration of LiDAR data collection.
12:15 p.m.-12:30 p.m.
Question.
12:30 p.m.
Depart for lunch site.
12:45 p.m.
Arrive at lunch site, Q&A and discussion.
1:45 p.m.
Depart for JMU.
2:35 p.m.
Arrive at JMU.
2:35 p.m. to 3:00 p.m.
Break.
3:00 p.m. - 5:30 p.m.
Workshop
3:00 p.m.-3:15 p.m.
Demonstration of Rockpack, kinematics, Factors of Safety, and CRSP.
3:15p.m.-4:00 p.m.
Demonstration of DPG and LiDAR point cloud data (MAYBE CRSP 3-D).
5:00 p.m.-5:30 p.m.
Discussion on RUVULOM and slope drape, Geobrugg products.
4:30 p.m.-5:00 p.m.
Discussion on soil nails, rock bolts, other techniques.
4:00 p.m.-4:30 p.m.
Discussion on rockfall fences, design methods, cost-benefit.
5:30 p.m.
Adjourn.
Sponsored by Marshall University Center for Environmental, Geotechnical and Applied Sciences (CEGAS) at Marshall University